How to Self Tan Properly

Photo of author
Written By Joyce VFM

Lorem ipsum dolor sit amet consectetur pulvinar ligula augue quis venenatis. 


There are a few tips and tricks you should follow before applying a self tanning lotion on your body. These include exfoliating, moisturizing and applying evenly. You should also be aware of the different steps for removing streaks and making sure that your body is dry. Listed below are some of the most important steps.


Exfoliation is a critical part of the self-tanning process. While most exfoliants are based on sugar, rice or salt, you’ll find that there are some that contain oils. You’ll want to find one that suits your skin type and color, and that leaves your skin feeling soft and smooth. A greasy canvas is no good for applying self-tanner.

To avoid patchy, uneven tans, exfoliate your skin before applying your self-tanning lotion. It can also help unclog pores and reduce the risk of breakouts. You’ll also find that exfoliating your skin prior to self-tanning will give you a more even tone and look.

To prepare your skin for the self-tanning lotion, scrub it with sugar or salt. Then, use a facial toner with alcohol to wash off any excess self-tanner. Be sure to target all the rough spots. Don’t forget to moisturize.

Sugar scrubs are also a great way to exfoliate to remove your self-tanner. You can find them in many stores, and some of them contain oil to break down the fake tan. You can make your own sugar scrubs at home with one part oil and two parts sugar. It’s best to find a brown or white sugar scrub that’s gritty but not too fine. You can also try Coco & Eve’s body buffing sugar, which is proven to work on all skin types.

It’s best to do your exfoliation at least 24 hours before you apply your self-tanning lotion. This will ensure your lotion penetrates your skin deeper and provide a better result. You should try to do this at least once a week to get the best results.


Before applying self-tanning lotion, exfoliate your body with a gentle body scrub. This will remove dead skin cells without leaving a stripping effect. Use a mild exfoliating body scrub such as Kiehl’s Gently Exfoliating Body Scrub to help achieve an even tan.

After exfoliation, moisten your skin with a body lotion. Avoid using moisturizers with oil. This can affect how your self-tanning solution absorbs. Use a fragrance-free moisturizer on dry skin. Apply moisturizing lotion only on your elbows and knees. This will prevent these areas from getting too dark.

Before applying your self-tanner, use a scrub with salt or sugar to prepare your skin. This is especially important for rough and dry areas. If your skin is dry, self-tanning product will not fully penetrate into your skin, and you could end up with dark patches.

After applying self-tanner, wait at least 4 hours before showering. It’s best to do so first thing in the morning or before going to bed. Don’t use hot water to shower as this may inhibit the absorption of the self-tanning product. Rinse with lukewarm water. Rinse thoroughly and avoid using soap or shampoo to wash your body.

Apply evenly

When applying self-tanner, be sure to follow a few simple steps to ensure that your tan is even and natural-looking. First, exfoliate your body with a sugar or salt scrub before you start applying your self-tanner. Make sure to exfoliate four hours before you start applying your self-tanner. Shaving before self-tanning is also important, because this step prevents self-tanning from penetrating hair follicles and creating brown spots.

After applying your self-tanner, wash your hands and feet thoroughly with a gentle sulfate-free body wash. Then, pat dry with a soft towel. After the wash, apply moisturizer to seal in the tan. This will prevent the tan from fading too quickly.

Apply self-tanner evenly on your skin using circular motions. Do not forget to cover hard-to-reach spots and avoid over-spraying. For the hands, use mitts to prevent excess product buildup between fingers. If you can’t avoid using a brush, use a kabuki brush to apply self-tanner to those difficult-to-reach areas. Be sure to wipe off the excess tanner with a tissue.

Before applying your self-tanner, be sure to exfoliate your skin. Dry skin can make it difficult to apply self-tanner evenly. The chemical formula in self-tanner reacts with the amino acids in the uppermost layer of skin. Exfoliating your skin prior to applying self-tanner will make your tan last longer.

Removing streaks

If you’ve applied self-tanning lotion to your body and then gotten a streaky tan, you may be wondering how to remove it. Luckily, there are several ways to do it. The first one is by wetting the area with a body scrub. This will exfoliate the top layers of your skin and remove any streaks. This method is especially effective if you have a lot of streaks, and it doesn’t take long to do.

You can also use an exfoliating mitt. You can use it to remove the streaks by washing your body in warm water. It’s best to exfoliate at least twice a day, so that your skin can regenerate. But be careful not to over-exfoliate. Exfoliating your skin too much will result in uneven tanning and could lead to cuts, wounds, and infections. You should also shower before applying your self-tanner.

Another DIY exfoliator is baking soda. This ingredient is also found in some whitening toothpaste products. Since baking soda is safe for use on your skin, you can use it as an exfoliating paste before applying self-tanner. Another option is to purchase a self-tanner remover mousse or wipes from the store. These products can be expensive, but they will leave your skin incredibly smooth and streak-free.

A self-tanner can stay on your skin for a week to ten days if you don’t remove it correctly. That’s enough time for a mistake to set in, but mistakes happen, and they can leave you with a brassy knee or elbow for quite some time. Luckily, you can fix these problems easily with a few steps.

Leave a Comment